View FH3-4S-125DS_1240183.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1.25mm Pitch FPC/FFC Connector
FH3 Series sFeatures
1. 1.25mm FPC and FFC DIP Connector
The contact pitch is 1.25mm.
2. Contact Reliability
This connector has high contact reliability for high voltage contact.
3. Sixteen Types of Contact Numbers
This connector consists of 16 kinds of 6, 8, 9, 10, 12, 13, 14, 15, 15, 17, 18, 19, 20, 21, 22, 24, and 30 contacts.
sApplications
HDD, facsimiles, printers, VTR, etc.
sProduct Specifications
Rating Rated Current: 1A Rated Voltage: 200V AC Operating Temperature Range:-40~+85c (Note 1) Storage Temperature Range:-10~+60c (Note 2) Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max. (Not dewed) Applicable FPC Item 1. Insulation Resistance 2. Withstand voltage 3. Contact Resistance 4. Mechanical operation 5. Vibration 6. Shock 7. Moisture Resistance in Steady State 8. Temperature Cycle 500Mo min. Neither short or breakdown should occur 20mo max. FPC conductor resistance included Contact resistance: 40mo max. No part should be broken, cracked or loosened No part should be broken, cracked or loosened No part should be broken, cracked or loosened Insulation resistance: 50Mo min. No part should be broken, cracked or loosened Frequency: 10~55Hz and full amplitude 1.50mm in 3 directions for 2 hours, respectively Acceleration: 490m/S2, duration: 11ms, sine half-wave: in 3 directions for 3 times, respectively Exposed to temperature 40c and humidity 90~95% for 96 hours 5 cycles under conditions as follows; Temperature: -55c+15~+35+85+5~+35c Time: 305 max. 305 max. for 5 minutes Note 1. Temperature rise included when energized Note 2. This storage indicates a long-term storage state for the unused product before board mounted. The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed in the board. Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification". 30 cycles t=0.2~0.35 Tin plating Specification Measured at 500V DC 500V AC for 1 minute Measured at 0.1A Condition (Not dewed)
D6
sMaterial
Part Insulator Contact Material PBT Phosphor bronze Finish Black Tin plating Remarks UL94V-0 -------
sOrdering Information
Please determine the specific product. If needed, please select and order the product from the product No. as listed on catalog page D8 and D9.
FH 3 - 17 S 1.25 DS (01)
q q Series Name w Series No. : FH :3 17, 18, 19, 20, 22, 24, 30 r Contact alignment : Single w e r t y u : 1.25mm : DS : Right angle type DSA : Straight type u (01): Tube t Contacts Pitch y Contact Style
e Number of Contacts : 4, 6, 8, 10, 12, 13, 14, 15, 16,
sFPC * FFC Dimensions
Unit: mm Number of Contacts
4
Size
6 6.25
8
10
12
13 15
14
15
16
17 20
18
20
22
24
30
A B
3.75 6.25
8.75 11.25 13.75
16.25 17.5 18.75 20
21.25 23.75 26.25 28.75 36.25
8.75 11.25 13.75 16.25 17.5 18.75
21.25 22.5 23.75 26.25 28.75 31.25 38.75
BPCB Footprints
Unit: mm Number of Contacts
4
Size
6 5
8 7.5
10 10
12 12.5
13 15
14 15
15 17.5
16 17.5
17 20
18 20
20 22.5
22 25
24 27.5
30 35
A
2.5
D7
sRight Angle Type
Unit:mm Product No. HRS No. Number of Contacts 4 6 8 10 12 13 14 15 16 18 20 22 24 30 A 08.70 11.20 13.70 16.20 18.70 19.95 21.20 22.45 23.70 26.20 28.70 31.20 33.70 41.20 B 06.27 08.77 11.27 13.77 16.27 17.52 18.77 20.02 21.27 23.77 26.27 28.77 31.27 38.77 C 03.75 06.25 08.75 11.25 13.75 15.00 16.25 17.50 18.75 21.25 23.75 26.25 28.75 36.25 Tube Case Packed Quantity 55 42 35 29 25 24 22 21 20 17 16 15 14 11
FH3-04S-1.25DS(01) CL586-0038-0-01 FH3-06S-1.25DS(01) CL586-0065-3-01 FH3-08S-1.25DS(01) CL586-0039-3-01 FH3-10S-1.25DS(01) CL586-0057-5-01 FH3-12S-1.25DS(01) CL586-0058-8-01 FH3-13S-1.25DS(01) CL586-0040-2-01 FH3-14S-1.25DS(01) CL586-0041-5-01 FH3-15S-1.25DS(01) CL586-0078-5-01 FH3-16S-1.25DS(01) CL586-0047-1-01 FH3-18S-1.25DS(01) CL586-0081-0-01 FH3-20S-1.25DS(01) CL586-0048-4-01 FH3-22S-1.25DS(01) CL586-0049-7-01 FH3-24S-1.25DS(01) CL586-0060-0-01 FH3-30S-1.25DS(01) CL586-0050-6-01
D8
sStraight Type
Unit:mm Product No. HRS No. Number of Contacts 4 6 8 10 12 13 14 16 17 18 20 22 24 30 A 08.70 11.20 13.70 16.20 18.70 19.95 21.20 23.70 24.95 26.20 28.70 31.20 33.70 41.20 B 06.27 08.77 11.27 13.77 16.27 17.52 18.77 21.27 22.52 23.77 26.27 28.77 31.27 38.77 C 03.75 06.25 08.75 11.25 13.75 15.00 16.25 18.75 20.00 21.25 23.75 26.25 28.75 36.25 Tube Case Packed Quantity 55 42 35 29 25 24 22 20 19 17 16 15 14 11
FH3-04S-1.25DSA(01) CL586-0043-0-01 FH3-06S-1.25DSA(01) CL586-0069-4-01 FH3-08S-1.25DSA(01) CL586-0044-3-01 FH3-10S-1.25DSA(01) CL586-0061-2-01 FH3-12S-1.25DSA(01) CL586-0062-5-01 FH3-13S-1.25DSA(01) CL586-0052-1-01 FH3-14S-1.25DSA(01) CL586-0045-6-01 FH3-16S-1.25DSA(01) CL586-0053-4-01 FH3-17S-1.25DSA(01) CL586-0063-8-01 FH3-18S-1.25DSA(01) CL586-0080-7-01 FH3-20S-1.25DSA(01) CL586-0054-7-01 FH3-22S-1.25DSA(01) CL586-0055-0-01 FH3-24S-1.25DSA(01) CL586-0064-0-01 FH3-30S-1.25DSA(01) CL586-0056-2-01
D9

▲Up To Search▲

Price & Availability of FH3-4S-125DS

	To Download FH3-4S-125DS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .